Better For Stunting?

I was just wondering, which of the x18 and x19 is better for stunting. I know that the x19 is smaller (shorter).

Also, would the X2 be a good stunter? Can I fit a 110/125cc Manual Engine in there?

Thanks in advance.

dude im just going to tell you right now the x18 is the bike you want for stunting you dont really want an automatic keep it manual and you can put a 140cc engine there thats what im doing to mine it will give so much pick up so i would say get the x18 for stunting i do all that stuff to like wheelies endos and i can scitch on it to which is hard but yea the x18 is the way to go....

Kk, thanks a lot man! And just to let you know, the x19 is manual too. Is there any reason for your saying the x18 is better?

i stunt on my X19 and im better than any1 on youtube x19 is an awesome bike no lie and im puttin a 140cc in my 2 so just go by look i like the X19 though

The X-19 is 165-170 lbs and the X-18 is 125 lbs.It takes less throttle to pull a wheelie on a X-18 and it endos easier because of its lightness plus the bike has a thinner profile than the X-19.My X-18 Stuntbike weighs 110lbs as it sits in the picture.I also have X-22 and X-15's.The X-19 is a stronger frames bike with way better front forks but the swingarms are weaker than the X-18.The X-18 makes a better beginner stuntbike and the X-19 is better for advanced stunters........................Peace

hes right if ur lookin 2 do some crazy **** go X19 but if u wanna just wanna pull some short weelies go X18 myself im a crazy *** stunter with a 140cc in it and a swing arm that is reenfored

get a x7 like me ....nah get the x18 no doubt....the guys that say other wise doesnt stunt...the other bikes are heavy POS's




lets say you get the bike with the weak swingarm....then lets say after you get good you are doin a seat stander going 40 mph and the swingarm breaks, what happens next

lets see the vids ....why would anybody think that frame is better when they cant even make a swingarm that wont break

u no wat stunt it go **** ur self ill make a vid during the summer i can stand straight up on the seat of my bike scith from the back and side ride turned back words and hold up wheelies forever so u and ur little x7 **** get of superbike chatterrom when u dont got anything

you're taking my comments personal huh ....you act like you got more skillz than i do and you might but show a vid before you talk sheet and if your talkn skitching ill be laughing at you while im watching bcuz skitches are wack especially on a lil bike


ps... you aint got sheet on me homie but show your vid if you have one....how long are your wheelies? 1miles, 2 miles....make a vid with your longest wheelie and ill double it

i live in shy town u little nitch show me a vid cause its -9 right now but i will when its gets nice out send it 2 u 2 so u stop talkin

lets see ur vid

i put 2 up from last summer i made with my digital cam theyre in this thread

midbike stunter vids

I'd say becareful stuntin on the x15/19's.They will break the swingarm pretty easy.But i suspect that it's mainly do to the rear shock.1. It's way to heavy and the coils don't have much space in between them.So when the rear of the bike bottom's out from impact.The coils stack and then the weakest point of the swingarm suffers.
Not to long ago i watched someone flip a x15 during a race.I'm talking the bike did summersaults from atleast 30mph.The swingarm held up,but the guy did flip the swingarm and and was running an aftermarket rear shock.So that's what lead me to believe that swingarms were breaking because of the rear shock.
I hate posting these pics.Because i don't want to scare people away from the x19/15's.I just want you guys to be aware and safe.Iv'e seen quite a few of these.So treat your equipment nice and you should be ok.

my swing is actually better than those S
my design isnt split in the middle of the swingarm pivot like those are, so mine should have less flex than the newer design
bike hit the ground upsidedown rear tire first, the shock went through the wheel, aluminum sprocket (thought of to be weak), chain, counter sprocket, output shaft, and exploded the big monster clutch gear

u not bad son u better at wheelies ill send u a vid of some of my **** but i do all the standin and scethin but good work with the bucket lol