IP2 Type 3 Race Pipes - Exhaust

I have these pipes for sale brand new for $60.00 shipped in the U.S. I can ship international for actual postage. Killer pipe!



Here is a pic next to a stock one. Big difference!



Thanks for looking,
Greg

i have a cag with a blata 2.5 engine on it will it fit

These work with Cags and I'm told they fit in Blata 2.5's as well. I own 2 Blata 2.5s and was planning on putting these pipes on them in a few days. Like any pipe they may require slight modifications to achieve a perfect fit because all these bikes are all slightly different. Are you running a pipe for a Cag now? I'll report back on wether or not this fits the Blata as soon as I install. Thanks,
Greg

hey just wanted to say thanks greg, got my pipe today and looks great, havent had ime to try it yet but i will post results when i get to try it

Glad you like it! Thanks Again!
Greg

I put one of my Blata 2.5 engines in a Cag frame of mine to try it out and the answer is yes. The Cag frame actually has a little more room for the exhaust then the Blata does but I put one on my Blata as well. Depending on which frame you have you may want to shorten the can a bit. (Very simple to do)
Let me know if you have any more questions. Thanks,
Greg

Tks for the pipe Greg ! Just want to share some pics with the pipe on my bike..fyi the end can was cut to about half the original size.

Looks pretty sweet ..... I may have to order one of these myself when i get the money for it ... How well does the pipe do on a stock 47cc Cag, Greg, performance-wise?

A pipe like this will give you more torque, mid-range, and more top end including RPM's. Great all around pipe! For the money you can't go wrong.

Very cool. That will probably be the pipe I order. I'm in the process of rebuilding my other Cag/Daytona (not The Rat, i have plans for that bike), and am going to be running a big bore kit on it as well as a new pipe, This and the BBK and some tuning would make a great combination.

Do you have a lot of these? I cannot order one right now (lack of funds), but I want to know that you'll at least have them when I DO finally have the dinero for one ....

This pipe w/ the BBK is a great combo. I have BBK's in stock as well and beat everyones price. I still have alot of these pipes left so don't worry about that. Thanks and let me know if you have any more questions,
Greg

Bump for nice pipe

Pipes still avail!

i wonder what the internal welds look like & if any pipe is protruding into the belly like the stock ones..

Check out my avatar I installed exhaust and it works perfect I modified a little by shortening the silencer it is 6" now and runs straight out the back. It is installed on 1 of the Cags that people say you have to cut and widen. With this pipe I didn't have to.

Looks good man! I just put one on one of my cags as well. Looks like the same bike! I took about 4 inches off the silencer on this one.
Greg

nice looking exhaust. any idea if it will clear the razor headkit on ddm? it looks like the "fins" will catch the expansion chamber.

I've been trying to find the answer to this and can't seem to come up with a definitive one. I seem to remember a pipe/head combination someone had where they had to grind a couple fins down to get clearance but don't remember what the pipe or head they were. If you can measure how wide your head is, I can compare that to the cylinder I have, then measure the clearance I have and see what it looks like. For now that's the best I can come up with but I'll keep looking. I'll be able to check this tomorrow when I get home. Thanks,
Greg

I've opened these pipes and the inside looks great and no extra tube protruding into the chamber. These were not made in China! haha

i just installed a razor headkit on my bike cag. i would be happy to test fit it on there if you would like. if it fits, i will purchase. don't know if it is something you would want to do or not, but i thought i would offer. now would be a good time for me as i have the motor out of the bike.