California girl entering the pocket bike world!!

Well first off we need to know what kind of bike it is! We could help you more if you get us pictures!!!

where do i post a pic at...lol....

Welcome to the forums, UseCaution.

You can use an image hosting site like PhotBucket, upload your pictures there, and then post the links here.

You can't post pictures right now so go to photobucket like SpyGuy said and upload there :P Then post the link. You could send it to my email as well, jtnktz@hotmail.com and I could host it and post here :P

okay I am uploading like 12 pictures to photo bucket...I will post the link in just a min!!

Yeah, one of the forum rules is that new users can't upload pictures directly to the site until they have like five posts or something. I just use PhotoBucket - makes it a lot easier.

Plus it saves all your pictures! I have 498 pictures and counting!!! :P

wow that is a lot of pictures!!!!! Here is a link I hope it works:

Pictures by usecaution - Photobucket

That is a Cat-Eye. It is a 49cc.

"Aaaand the survey says ..." Okay, that looks like a Cateye, 49cc. Justin, help the girl out - you got one. Sorry I can't help out with the wiring, never had one, so I don't know what to tell you .......

Several of our other member have Cateyes, too, so you'll be able to get plenty of help, mostly over in the 2-Stroke Midbike section.

I would start with a pull start. You can get it from: Super Pocket Bikes > X1 Super Pocket Bike > Stock Parts - Part Name: Pull Start - A

Also correct me if I am wrong but is it missing the flywheel too?

omg you knew that by just looking at the pictures!! you are good!!! now where do I go from here....

flywheel?.....and it looks like i finally found the right site for help!!!

Brain fart, no it's not missing the flywheel wrong side. :P The first step I guess would be to get it running!

Do you want to keep the electrical? Most like to throw it out to save on weight. The wiring is not needed to run the engine. But you DO need the 2 wires coming from the engine as these are your kill switch wires so don't cut those!

Oh, you definitely found the right site ....... hang with us, we'll getcha back up on two wheels .....

well i did not cut anything but there is stuff that is not connected...the bunch of wires he handed me and said here i think these go with it...i dont think i need the electrical...would kinda like electric start later...but for now i just want ot to start, and drive...

i cant wait to ride this thing!! i will stay here forever..lol

In that case go ahead and remove all wires except the killswitch wires like mentioned above. Do not cut! Just zip tie them so they are out of your way. Put the wires that come out to the side. This will give a much cleaner look. I would go ahead and order a pull start. If you have eBay go there, it's cheapest just make sure it will fit a 49cc engine!!! It looks as if you may need to go to a local hardware store to purchase bolts to screw it in as well.

so blots for the pull starter right? okay I can do that....another thing I noticed is that the rear chain seems to not want to fit on the back sprocket....there is a certain size one that should be on the back tire? Also is the picture with all the wires there is a little cylinoide (sorry I am really bad at spelling) thing that they are connected to...do I need that?