How To: Uninstall X7 R1 Governors (Pic)

krazyqban · #1 03-28-2005

There are two governors on the x7 R1 pocketbike. One is located in the hand throttle and the other is on the top of the carburetor. You will need a phillips screwdriver and an allen wrench. To uninstall the hand throttle governor unscrew the two large screws on the top of it. Take it apart and you will see a black, half circle, plastic piece, remove that piece and screw the hand throttle back together. To uninstall the governor on the top of the carburetor unscrew the bottom screw of the small L shaped piece. Once youve taken that off remove that screw and screw it back in without the L shaped piece. Removing these governors will allow you to go alot faster because your engine will rev at higher rpms. I hope this Helps if you have any questions send me a PM and I will try to answer them.

jpx2 · #2 02-25-2007

When i took my handle apart on my x1 it had the smae half circle but in white do you think it is a governor

Lowjacker · #3 03-18-2007

That's the governor. Just remove it and it will help.

krewdog · #4 04-03-2007

buy a race ported butterfly carb it has bigger hole and all uneed slow u down crap is taken out !

fomocobro · #5 08-13-2007

does the x18 have one

PocketBikeBoy14 · #6 08-13-2007

hey how much speed do u gain when u take off the goves?

x-18 seems good · #7 08-13-2007

why dont you take them off and see

obviously its gunna let you go faster

even if it only a few mph speed is speed

PocketBikeBoy14 · #8 08-13-2007

i dont have a x-7 but thanks.....

pocketrida05 · #9 08-13-2007

what if i just took the one in the throttle out

eVILPeeR · #10 08-13-2007

Is this the 4-stroke or 2-stroke model?

fomocobro · #11 08-13-2007

does the x18 four stroke got one

Crazyj15692 · #12 02-23-2008

It is the 2 stroke model and it should work on all 49cc mid bikes.

pocketracerdad · #13 03-01-2008

Quote:

Originally Posted by krazyqban

There are two governors on the x7 R1 pocketbike. One is located in the hand throttle and the other is on the top of the carburetor. You will need a phillips screwdriver and an allen wrench. To uninstall the hand throttle governor unscrew the two large screws on the top of it. Take it apart and you will see a black, half circle, plastic piece, remove that piece and screw the hand throttle back together. To uninstall the governor on the top of the carburetor unscrew the bottom screw of the small L shaped piece. Once youve taken that off remove that screw and screw it back in without the L shaped piece. Removing these governors will allow you to go alot faster because your engine will rev at higher rpms. I hope this Helps if you have any questions send me a PM and I will try to answer them.

I got a 08 x7 and it don't have either one of these governors .

pocketracerdad · #14 03-01-2008

my 08 dont have either one of those pieces so now what?

Crazyj15692 · #15 03-01-2008

Quote:

Originally Posted by pocketracerdad

my 08 dont have either one of those pieces so now what?

Well, than they aren't made with those anymore.

soaponarope · #16 03-02-2008

hi i just paid for a x7 engine and its missing all the wires, i have looked for weeks for the wires i need. IF ANYONE CAN TELL ME WHAT WIRES I NEED, OR TAKE A PIC OF THEIR X7 AND ALL THE WIRES WITH DETAIL SEND IT TO..WASTEDEFFORTS325@HOTMAIL.COM AND I WILL PAY THE FIRST PERSON 5$ PAYPAL IF IT REALLY HELPS ME OUT ILL PAY 10$!