How-To's: Hardware Shopping List

I found the list that was posted previous to the site hack. I printed it out and have no reference of who originally posted. However, it's useful and here is the original post:

================
6mm x 30 (x2) Handlebars (+ 6mm washers and locknuts optional)

5mm x 30 (x4) Front Arms

5mm x 20 (x2) Pegs

6mm x 20 (x1) Tank

6mm x 16 (x4) Motor
OR
6mm x 20 (x4) Motor w/ 8 Dampening Washers

6mm x 16 (x2) Brakes (+ 6mm locknuts (x2))

6mm x 16 (x1) Stock Pipe Bracket
OR
6mm x 20 (x1) Stock Pipe Bracket w/ 2 Dampening Washers

6mm x 10 (x2) Front Fairing Mount

6mm x 35 (x2) Chain Guard

4 Dampening Washers for Seat

10mm locknuts (x2) Axles
------------
The dampening washers are to help remove vibrations. I used 1/4 x 5/8 bonded sealing washers (basically a washer with rubber on one side).

Bringing this back from the dead!

Everyone needs to get this list, it's a must!!

An addition:

Bolts on bottom of stock carburetor: 4mm x 10's (2)

Petcock bolts: 3mm x .... whatever the smallest one is, lol (2)

Drain plug: 4mm, shortest size + (1) rubber washer

Also, some hardware stores sell nylon spacers in different lengths. These make excellent replacements for the stock spacers on the Cag chain guard. Take along one of the chain guard bolts to make sure you get the correct size - you'll need 2. (On the newer Cags, are the chain guards held on with three bolts? If so, you'll need three spacers.)