Getting My Photos fr. kodak to PBP.com

Hi its EPR,
I am here to trying to transfer 1 to 3 of my bike photos, and just in case,
I got my Dead Blow Hammer, to convince my LapTop w/ 2 Ghz, dual core,
it better get to work or I might make a slight Ajustment!!!
I got instructions from SpyGuy, but Kodak Easy Share is a bunch of crap
I made a new folder, I wanted to send the file to My Pictures, Win.XP,...
sorry no go, the tranfered back to the orginal folder, I hate Computers!!!!
Anyway, SpyGuy, if your out there, I started Eng.#1 today 5 times, I let it run 5 mins. and I touched the head and it didn't Burn Me, so Life is
GOOD!!! Now, I am ready to Assemble #2 next week, but I have some...
more work to do on the 3rd fuel port slot, are looking at Boosted306s..
photos of his cyld. mods., & carb, reed, int. manifold, etc.

Deadblow hammers don't work very well for intimidation, EPR. Now, a nice 10- or 20-pound sledge ....

Good, glad to hear you got the engine running decent. now on to #2. Figured out how to set up the dual linkage yet?

Spyguy,
I can't get my photos out of Kodak Easy Share Program, I did put them in a seperate folder!!! I can e-mail them easy, but it won't let me upload
them to My Pictures in Win. XP??? I am going to just e-mail pocketbike-
planet.com, and see if that works, or try to copy to cd-r disc, the send
them to My Pictures in Win. I don't think I can just e-mail them to.......
PBP.com!!
I think the carb. needs a bigger jet, it is stock w/ the needle raised 1
notch!! Looking for a 6 jet kit, or I heard something here somewhere
about an Adjustable Jet, & the Guy said, put 3 washers on & tighten it
down!!! Say What??? The engine snaps to, Quickly but it is New, & I
don't want to push it to hard, it goes Flat on Top like its not getting
enough fuel!! I have a jet here I drill out to .062, 1/16th, I put it in
the #1 carb., then I went back to stock!! About the cable, I will loop
around a U, with an adj. nut on each one to a single cable to throttle
twist, you adj. the length on the U to carbs. till both carbs. open at
the same time, like dual SU carbs on MGB sports car!! It will NOT be
EASY!! I could go hydrallic, big bucks!!!

I'm Back,
Got my photos on My Pictures, going to try to upload NOW!!!!!

Ican't upload!!!, cause my 12 meg. photos are to much for this forum!! The file is to BIG, 2.27 megs. so I guess that takes care of my Photo
Deal. 512Khz is out of the STONE AGE!! they don't even sale 1/2 meg.
cameras!! Time to start looking somewhere else to POST THEM!!!!

Sorry to hear it's been such a pain to try to get your pictures up here, So I offer for free my service, If you would like to email me the pictures I would be more than willing to re size the pictures to proper proportions for this forum.

Let me know if you are interested, Otherwise any of the free photo hosting sites will probably work fine.

Nick.

Dude, can't you cut 'em down in size? Even MS Paint should be able to do that .... You open the photo in Paint, select Image, and choose Stretch/Skew (DO NOT choose Attributes - that just chops whatever amount off the right and bottom of your original sized picture). When you open Stretch/Skew, a box will open, saying Horizontal/Vertical Stretch at the top, with the number 100 beside it - that's the current size of your picture (100%). By choosing lower numbers than 100, you can change the size of your picture down, like 75%, 50%, 25% ... which will also change how big it is, going from 12mb down to something more manageable.

And you can always upload to PhotoBucket and post the links to your photos here, too ...... nothing says you HAVE to put your pictures on this site.

SpyGuy & nickj,
Thanks, I am going to try to, I am not sure if I can open my photos in
Paint, been a long time since I been there, but I will try!! just before I
read your post, I said the photos to Big, got to make it smaller!! I just
gave away a 3.1 Meg Toshiba, to my niece, & I have a Digital Video
Mpeg 2 thru 4, with a 2 Meg still camera, 32Meg internal, & takes SD
Cards, I might try that too!! Taking some new Photos tomorrow!!!
Got to ride my X18R, next time I am Video Tapeing the Ride & Try
to put it on You Tube, or etc. I think I passed Lance Armstrong, &
Levi leppinhimer or something like that they ride down my road from
time to time and HACK-OFF all the rednecks here and half of my.....
Family are from Arkansas, Oaklahoma, & Texas, so I'm Hip!!!!!!
I watched NHRA, & NASCAR, # 9 he is the Man today!!
I took the rear brakes of the Cag., the Pads are only 5/8th of the
way on the Disc, so I have to modify all the parts! I swear the front
Tubes on my Bike are bent back!!! I think I am going to Kick the Neck
on the Frame 2 or 3" and buy a Real Front End, PBU has nice ones w/
2 brake discs for Cags. for 178 dollars!! I need 2 or 3 inches over stock
tubes to kick it out & I don't know if they can do that!!
I had a 836cc Honda chopper before turned a 10.88 seconds at....
Fremont Drag Strip, it was chopped & stretched 4" over tubes, neck
kick out 11.5 to 1 wiscos cam, Dan Gurney Exhaust, I have a photo
here somewhere but I do not know if they want it here!!! EPR!

I'm Back,
I took my photos to Paint and made them small, but it does not say how
big the photo size is so I am still in the Dark!!!!

EPR,
Photo #2

EPR,
Are we having Fun Yet, #3

Well, they're looking good so far, EPR ....Nice ride.