highest gearing possible, for stock bike

what is the highest gearing that i could get on a stock cag without stalling , or having to pull it from the back of a truck to start

stock? not much more than stock if anything maybe a 60tooth rear..a 7tooth front will kill your bottom, unless maybe you have the big bore

i run 7 62, and my accel is amazing. i have walbro carb, badazz dual stage reeds, and a weird *** goped pipe. tops out at almost exactly 40 mph too

the factory big bore Cagamis have the strongest factory big bore I have ever seen and they pull 6/52 gearing with accelaration that is on par with regular cags but have a top speed of 37mph, I think they have the power to pull a little more gear and get over 40mph but at a significant loss in accelaration.

It all depends on how well your stock motor pulls, some have great low end and do not mind taller gearing, other cags have trouble pulling the stock 6/68. Typically the best ratio for long tracks on a stock cag is 7/70 and that will still provide reasonable accelaration on a stock cag but it just depends on how your bike runs since it seems no two cags run the same.

My friend has a 8 / 60 set up. but its just a top speed cruiser the low end SUX.

i run a 8/68 and my top end gained 7 mph but low end suffered

well if your light run 7/68 but if you're like 175 ++ then run lower gears in the back

if u just wanted straight top speed u can run a 10 tooth in the front but it seriously would take u all day to get to that speed and u will end up probably at the end of ur road by then