NEWB to pocket bikes and need help

hey everybody, just got my first pocket bike, not sure what kind it is or anything because it had no plastic, all it has is a vin and im not sure what website i can go to to run it to find out. but anyways it had taillights, horn, turn signals, taillights, etc. and i removed that wiring to make it simple. i also decided to remove the speedometer, voltage meter, and other misc. guage, in doing that i think i cut a couple of wires coming off the magneto and im not sure where to rewire them to make them work,

the wiring that is left is the wiring coming out of the magneto, a couple wires split off and go to the cdi box, and a few wires go to a relay then back out of the relay looking thing and into the cdi box, and there is one wire that comes from the magneto that plugs into the coil. if anybody has a wiring diagram or something to tell me what each wire does it would help me out so much, ill list all the colors of the wires and where they run to so that somebody may know what they do.


coming from the magneto:
1.solid Yellow
2.solid white
3.solid green
4.solid black
5.Blue w/ White tracer

coming from cdi box:
1.solid Yellow
2.solid Red
3.White w/ Black chaser
4.solid Black

coming from relay box:
1.solid Black
2.solid White
3.Red w/ Black tracer
4.Blue w/ White tracer
5.Yellow w/ Black tracer

i will post up pictures of the wiring and where it all goes to