stage 3 from badasstoys

in the stage3 kit from badazz, does it come wit all the jets(total of 6 in the jet pack) or just the three included in the picture.

don't post a thread for this. pm BAT for questions.

7 in total..1 in the carb then a 6 pack

can you get a hold of jets higher or lower than the 6 you sell..

I made an insert for my sha replica carb (took it off my C1) out of 1/4"O.D. 1/16 wall aluminum tube so I could use standard Dellorto jets in the carb. I used a die to thread the outside of the tube(matching the threads in carb) Trying to completely tap the inside of the tube was impossible as the aluminum became too thin. So, I tapped the insert about 2mm in and just slowly screwed an extra jet in and out to make the threads. I cut it to length then installed it in the carb. It works GREAT.

Banzai !!!!!!!!

the jets that come with it will most likely be good enough for what u will need them for.....if u need bigger u can always drill them out

oh yea thats right..some dude on here(forgot the name) had a pbu sleeper head kit, ip2 and all the lil stuff and he was on the 82jet and said he was running lean.