Engine options for MX350 and PR200 - Pocket Bike Forum - Mini Bikes
 
LinkBack Thread Tools
post #1 of 9 (permalink) Old 06-21-2019 Thread Starter
verified
 
Join Date: Mar 2019
Posts: 5
Engine options for MX350 and PR200

I have a razor MX350 and a PR200 with 1016 engines, What options are available for engines for these bikes ?, I have seen that the 1020 and 1050 do not take on the site without major changes.

Economical brushless options? Radio control motors?
ecologymagnet is offline  
Sponsored Links
Advertisement
 
post #2 of 9 (permalink) Old 06-21-2019
Super Moderator
 
MrKitty's Avatar
 
Join Date: Mar 2014
Age: 39
Posts: 1,433
Garage
any motor upgrades are going to require a speed control chang out as well you might search around ebay for a motor speed control combo kit

https://www.monsterscooterparts.com/...ttle-kit_2.jpg

Faster then a speeding E Revo
MrKitty is online now  
post #3 of 9 (permalink) Old 06-22-2019 Thread Starter
verified
 
Join Date: Mar 2019
Posts: 5
Re: Engine options for MX350 and PR200

Yes, speed control I have for brushed or brushless motors; but due to space a 1020 or 1050 does not enter without making major modifications.
ecologymagnet is offline  
Sponsored Links
Advertisement
 
post #4 of 9 (permalink) Old 06-22-2019
BUILDEM,WRECKEM,REBUILDEM
 
CAM2's Avatar
 
Join Date: Mar 2008
Posts: 20,892
Re: Engine options for MX350 and PR200

Quote:
Originally Posted by ecologymagnet View Post
Yes, speed control I have for brushed or brushless motors; but due to space a 1020 or 1050 does not enter without making major modifications.
Theres another option if you dont mind going 30mph...........

Take a variable voltage 1000 watt hub motor with 84lbs of torque and lace it into the rear rim.

In fact they already sell hubmotor built into 12" aluminum rims too..

Put a hub motor setup on the front rim wired-in in series and youd have the most craziest and unique MX350 that nobody has or ever built...

Even building one with just 1 rim mounted hub motor would be a build no-one has done...

Good Luck

Cut
Up
Stuff
To
Obtain
Masterpiece

Last edited by CAM2; 06-22-2019 at 08:19 AM.
CAM2 is offline  
post #5 of 9 (permalink) Old 06-22-2019 Thread Starter
verified
 
Join Date: Mar 2019
Posts: 5
Re: Engine options for MX350 and PR200

It was one of the options I thought with a Xiaomi M365 engine for example, I got to put 2500w and 50-60 kms / h, the bad thing is that I would lose the standard brake and only the electric would be left.
ecologymagnet is offline  
post #6 of 9 (permalink) Old 06-22-2019
BUILDEM,WRECKEM,REBUILDEM
 
CAM2's Avatar
 
Join Date: Mar 2008
Posts: 20,892
Re: Engine options for MX350 and PR200

Quote:
Originally Posted by ecologymagnet View Post
It was one of the options I thought with a Xiaomi M365 engine for example, I got to put 2500w and 50-60 kms / h, the bad thing is that I would lose the standard brake and only the electric would be left.
This 3000 watt one comes with a disc brake rotor..

https://www.aliexpress.com/item/3248...1107356&isdl=y



Then you have one with a built in rear swingarm....

https://www.aliexpress.com/item/3286...c-f1d1baa78168



If you lace the hub motor in you could add a hydraulic rear disc brake setup from an x7 pocketbike using either side of the hub...........




Theres plenty of different options and possibilities....



Either way you look at it youre gonna have to modify something...Best route is to list all pros and cons to each and go with the best candidate for the task that gives the best bang for the buck.....Good Luck

Cut
Up
Stuff
To
Obtain
Masterpiece

Last edited by CAM2; 06-22-2019 at 09:10 AM.
CAM2 is offline  
post #7 of 9 (permalink) Old 06-22-2019
Super Moderator
 
MrKitty's Avatar
 
Join Date: Mar 2014
Age: 39
Posts: 1,433
Garage
im going to assume you plan on powering it with lipo or li-ion...

Faster then a speeding E Revo
MrKitty is online now  
post #8 of 9 (permalink) Old 06-22-2019 Thread Starter
verified
 
Join Date: Mar 2019
Posts: 5
Re: Engine options for MX350 and PR200

Yes, Lipo.
ecologymagnet is offline  
post #9 of 9 (permalink) Old 06-22-2019
Super Moderator
 
MrKitty's Avatar
 
Join Date: Mar 2014
Age: 39
Posts: 1,433
Garage
in that case im with CAM2 go with a hub motor then there is no belts or chain's to worry about

try to find a speed control with soft on or the tourqe might be a issue

Faster then a speeding E Revo
MrKitty is online now  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Pocket Bike Forum - Mini Bikes forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may not post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome