Re: May/June Bike of the Month
Oh Yeah, I fixed the Blue head Demon engine today. It was scraping the bottom of two head gaskets, so took the piston off, ground the top down and around the outer 1/2" edge of the top of the piston to clear, and it is a super light piston now. should turn some good RPMs. Have to fix my engine stand, before I can start it.
The Blue A2 had a fowled plug, got it running planning on putting a Silver ADA Alloy Head to replace the cheap finned head. Started putting the WT 813 Walbro on the 49cc Zenoah engine on the scooter, it has an accelerator pump for good starts.
Tomorrow want to start on Sam's new Stocker Red Head/Cyld. Need to sand & polish a few things before I assembly it.
Now I have 2 engines sitting in boxes, a third needs main bearings, want to take the split cases to a bearing shop or see if I can get a set of Dave's 32,000 RPM bearings to fit the Cag cases and crank & in that motor, putting together a 40cc 2pc cyld & head kit I got on the orphan sale, has an 40-44mm Alloy head with a 40mm 15:1 head piece. Then going to cut a 7/16" wide third port and a hole in the piston, on a stock 10mm crank, or maybe I will shell out $25 for a 10mm FC crank. Thinking about welding the pin on the crank so it can't spin.
Empty Pockets Racing: The difficult we do, the impossible takes longer.....
Last edited by EPR; 05-23-2011 at 08:00 PM.