Pocketbike Forum banner

49cc

  1. Need some help with a Cateye

    New to PocketBikePlanet? Star With an Introduction
    Hello all, I'm new to the pocket bike world. I've done some work on minibikes before using a 212cc 4 stroke engine. I recently picked up a cheap 49cc 2 stroke cat-eye bike and I was looking to do an engine swap. Was wondering if this engine would work for it, or if I would need to mods. Thanks...
  2. x2 Pocket Bike Pull Start Doesn't Turn Motor

    New to PocketBikePlanet? Star With an Introduction
    Hey guys! New to the site! First of all, my pull starter works great, however, I pulled it off to try starting it with my impact wrench. Like an idiot, I turned the 13mm bolt counterclockwise (opposite of engine rotation) and I made the little metal piece that connects to the pull start no...
  3. 49cc loncin mini chopper

    New to PocketBikePlanet? Star With an Introduction
    Hi all. im new here.. I just got a mini chopper with a loncin 49cc engine and manual gearbox. It has some wiring issues and needs some new parts here and there. Im looking for wireing diagrams and parts suppliers any help is greatly appreiciated thanks .:tango_face_smile:
  4. My bad buy X2

    2Stroke Midbikes
    Hello, I am new to the whole scene. Which probably means i shouldn't buy someone else's project which is basically a roller. Lets just start off with what it did come with!! Obviously it came with a frame (which is a little rusty since i assume he stored it outside) other than that its pretty...
  5. Im New. From Oklahoma

    New to PocketBikePlanet? Star With an Introduction
    Hi. I'm Aidan from Oklahoma I have a X7, Mta 4, and a Cateye FS509 I have several upgrades on the X7 and Mta 4. Currently installing upgrades on the Fs509. I'm also having trouble posting to other thread, this is the only one it will let me post to. Help? Thx, Aidan
  6. Cateye Pull Start

    Midbikes / Superbikes
    So i bought a cateye for $30 and the only problem is the pull start, i can only get it started with a drill because there was no pull start. It only came with the catcher for the pull start, so i bought the white pull start in the picture. The pull start did not mount because it was too far away...
  7. upgraded to 49cc, need bigger jet?

    HELP! Ask our shadetree mechanics
    i recently upgraded my cag to 49cc head kit, I got it to run but only at 1/2 -3/4 throttle with the choke on otherwise it dies. I let it warm up but still the same thing happens. if I turn off the choke it dies as well. im thinking off the top of my head get a bigger jet. thanks in advance...
  8. RTV Silicone For Base Gasket

    Air Cooled Pocketbikes
    Hey guys, i tore the base gasket on my 47cc dirt bike engine and was wondering if I can use rtv silicone for instead of a gasket. If so do I put some on the crankcase, let it dry, then assemble cylinder. Or just assemble while still sticky. I know that's not the best way to use rtv but it's...
  9. Building a Headlight Mount (Dirt-bike)

    The VIDEO Library
    Last Summer i purchased this Tomos Tx50, i have been restoring/fixing it. This Weekend i made a headlight mount for it, i will be using the dynamo that is inside the engine. :thumbsup:
  10. How to remove clutch on a 49cc X7 with CVT

    HELP! Ask our shadetree mechanics
    Hey pocket bike plant, I need some help again. So recently I bought a X7 as is off of craigslist for $120, and got it running. The problem is I'm hearing a loud grinding sound and I'm almost positive it's coming from the clutch. Does anyone have a guide how to replace the clutch on a 49cc X7...
  11. Cateye with new carb won't start

    General Pocketbike Discussion
    So I bought used 49cc Cateye pocket bike. It didnt start so I bought a new carb. Now it has a very hard time staring. It sounds like I wants to and then I stops. It has spark, compression is good, there are no air leaks, all gaskets are good. Also, when it does run and I give it gas it is too...
  12. Need help please

    New to PocketBikePlanet? Star With an Introduction
    Well hello, I'm new here and just need a little help. I had bought a KXD-504, it's just a cheap, little Chinese mini dirt bike and I've already had many issues with it. The main issue is the pull-start, which is my only problem now. I've had to replace it twice and I've only rode it around 4...
  13. x1/x2 pocket bike help

    Air Cooled Pocketbikes
    Hey!! just got this pocket bike on craigslist for $110! and it needs a pull start! then in my gas tank there is 2 holes, and 2 holes in the motor for the fuel lines to go, but i only have 1 fuel line that goes through the gas tank to the motor. do i need a second one?? first time doing this...
  14. X1 Pocket Bike 43cc - Rebuild

    General Pocketbike Discussion
    I bought a pocket bike for $40 didnt run so I decided to rebuild all of it.. After taking the whole motor apart I Found there was no gaskets besides intake, the piston was scored and the cylinder was full of metal shavings from the piston bc the fuel was lean ( not enough oil in the mix ). I...
  15. Exhaustn bolt problem

    Air Cooled Pocketbikes
    Hi, i am new to the pocket bike planet and this is my first post. I recently bought a bike and the exhaust bolts keep popping off. M8 x 1.25 bolts fit but need to be a quarter inch longer for any washers to be able to go on and the bolt reach down into where it screws in. Unfortunately i...
  16. 49cc Suzuki pocket bike flooding??

    New to PocketBikePlanet? Star With an Introduction
    Hi, I am new to pocket bike planet and I am having a lot of problems with my 49cc Suzuki pocket bike. When it actually runs it is really fast, but I always have had issues with starting it and keeping it running. I just bought a brand new carburetor for it yesterday thinking that it would...
  17. Need wiring help on a 49cc 1 speed cat eye mini bike!!

    2Stroke Midbikes
    I have a 49cc Gasoline 1 speed pull start cat eye mini bike and have no idea where to put my grounds at or what to put on my cylenoid!!! please help!!!! :confused:
  18. Ignition Troubleshooting

    HELP! Ask our shadetree mechanics
    Hi, Im brand new to the forum. I bought a 49 cc zstar 2 stroke pocket bike as a project for my son. It has a pull start only. I am not getting any spark when i pull the pull start and ground the plug out to the frame. Does anyone have a manual for this bike or can tell me how the wiring should...
  19. Problem Registering bike

    WHAT'S THE LAW?
    I live in Michigan and I can't figure out how to register my new Ninja x6. With my purchase I wasn't given a Manufacturer's Certificate of Origin when I bought the bike from a local dealer. So I was informed by a member of Secretary of State that I would need the year, make, and VIN # to...
Top