Pocketbike Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Air Cooled Pocketbikes
    Hello all, I am hoping this forum isn't too dead, I missed the pocket bike craze in the early 2000s as I was younger and couldn't afford one. Now as an adult with a super sport, dirt bikes, etc., I still want one. I was researching cags and decided I wanted a 47-49cc two stroke. After finding...
  2. Help! Ask Our Shadetree Mechanics
    I have a video but too large for here so if anyone msg me I'll send it its a mini motor quad I got for my son it runs great on idle but WOT it dies I've tried moving the c clip up 1 notch still same type of let down
  3. General Pocketbike Discussion
    This is my project that im working on, last week i picked up a little 49cc dirtbike for 80€ it already had a bigbore kit on it. my goal is to put street tires on it and a exhaust that goes under the bike. and make a Sm out of it! this is what im working on now its a Bidalot/Technigas...
  4. New Member Introductions
    so i got these reedplate kit 2pcs 10x10cm. 0,3mm thick from malossi. but i cant get it to close them al the way there’s a tiny gap in between the reed and reed valves. is it a big problem or will it seal off with the oil and gas mixture? i removed the middle part for better air flow. i hope it...
  5. General Pocketbike Discussion
    Hello guys i have a 49cc pocket bike and i recently tried to clean the carb.After a while i noticed that the float is stuck and then saw that the float needle valve was broken.I removed the valve cleaned the carb and then reinstalled the carb without the float needle valve.I cant find another...
1-5 of 5 Results
Top