Pocketbike Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 25 Results
  1. New Member Introductions
    Whats up guys. Glad to see this is a pretty active community!! Here's a few of my rides! Oragami B1, Elite 13jr, one of the 3 2.5s, and a Liquid cooled GRC Polini :)
  2. New Member Introductions
    Hi, I goes by JT. I'm in the market for getting my first pocket bike. I'm thinking Blata 2.5. Anybody know who and where I should contact? I live in New Hampshire. All I can see is BlataUSA.com in Florida but I've had a hard time connecting with them over the phone and email. Thank you and Happy...
  3. Water Cooled Pocketbikes
    I have a chinese copy of a Blata W50, it currently has a sprocket to suit what I believe to be the smallest chain available. I've had bad experiences with these chains (exploded on me and didn't work until I bought the next size up) and as such I would definitely like to run a larger chain...
  4. European Pocketbikes
    Here's some pics let me know if you need more it's air cooled and in pretty good condition. Any info would be perfect and thanks in advance for taking the time to stop and take a look.
  5. General Pocketbike Discussion
    My friends brother passed away and he was and avid racer of these bikes. I have been tasked at finding their value and selling them to someone who would appreciate them. Anyone who could help me determine their reasonable value and maybe the best venue to sell them would be much appreciated...
  6. New Member Introductions
    On a Blata 2.5, the lower / front fairing assembly, aside from the two bolts on either side, is there any other hardware that keeps the fairing in place and prevents it from moving? The issue I’m having is that the front wheel is rubbing the lower V section of the fairing. This can’t be normal...
  7. European Pocketbikes
    A couple weeks back when I first rode, the bike would start up slow then the clutch would grab and the bike would rev and pick up speed( I love that feeling). After some minor tuning the past weeks, I had trouble keeping the bike in idle from a cold start so I upped the idle. I believe the...
  8. General Pocketbike Discussion
    The 2.5's clutch cover should be able to come off by removing the 4 bolts right....? lol Been trying to get the clutch cover off, but no luck. Sort of like its glued to the engine. Anyone have clever suggestions on how to remove?
  9. New Member Introductions
    Hey everyone, I picked up a Blata 2.5 this past weekend from a local. This is my first pocket bike and first 2 stroke motor. The bike is in good condition, but my plans for this pocket as of now are to replace some parts(wheel bearings, brakes, new bolts etc) to make it safe proof, then turn it...
  10. New Member Introductions
    I am very new here and I need some help. I live near Albany NY and no one seems to have information for me. I am trying to sell my husband's Blata pocket bike. I know that it is older but he only rode it maybe 3 times if that. I don't know much information on it and was wondering if anyone...
  11. New Member Introductions
    Hi, I just wanted to welcome everyone on this forum and say thanks already as im pretty sure ill be asking a lot of questions lol :) Well i live in Wolverhampton UK and i recently bought a Blata 2.5 fully stock, The bike is running however i don't know anything about Blatas... I repair quite a...
  12. New Member Introductions
    I need a pull start for blata 2.5
  13. New Member Introductions
    Im new here so bare with me. Just picked up a blata liquid cooled pocket bike. What are peoples thoughts on these bikes? Im not positive on the exact model but i know it is a blata.
  14. New Member Introductions
    New to the pocket bike world here im trying to figure out exactly what i have. It runs great liquid cooled says blata all over every part and has the blata logo all over.
  15. New Member Introductions
    hi people I have just found a little project for myself and my 11year old son we are going to rebuild a blata but we have no idea for the model we have places to source parts so we have joined here we are in the uk needs a flywheel and pull start I have started it with a drill and it runs ok...
  16. General Pocketbike Discussion
    buying a new carb and there are 2 of the exact same one that fits my bike but one is 15mm and one is 19mm, what do i measure to find out which one i need?
  17. Water Cooled Pocketbikes
    Hey looking for anyone who can help. I have a ten+ year old polini 910 carena s, and I'm pretty sure it's all stock still. I was wondering what the best fuel-oil ratio is? Also what are some of the best initial upgrades to make on the bike? It already out performs my friends cab by miles, what...
  18. Water Cooled Pocketbikes
    Hi guys!! Im buying a watercooled bike from an oak. He is building the thing, now i must choose between a c1 and a c2 frame, for racing purpose, which one would be the best? My weight is 70kg/154lb so as far as i know the c1 is a pipe frame and the c2 is an aluminium frame but which one would...
1-18 of 25 Results
Top