Pocketbike Forum banner

cag

  1. Exhaust wont fit?

    General Pocketbike Discussion
    So I installed a big bore engine into my 2011 cag (stage 5 54cc motor off of ebay) and the stock exhaust doesn't line up with the exhaust port of the engine. I didn't really expect it to fit, but I still need a pipe that will work. I don't have any leads on a pipe that will fit after browsing...
  2. Caglleri MT-A1 Build Advice, From Scratch

    New to PocketBikePlanet? Star With an Introduction
    My mini bike I got for free and the only things salvageable were the brakes and wheels and frame. What I am asking is, what is the best WHOLE MOTOR, not something I have to build, I can get. I of course want to make one but my lack of experience in MOTOR building prevents me from gaining the...
  3. How to winterize a pocket bike

    General Pocketbike Discussion
    so I have had a lot of people coming up to me asking how to winterize a cag and what they should do to successfully press the pause button on there cag so it can sit throw storage throughout the winter and be ready to go after all the snow and ice melts without all the major flusteration of...
  4. Need pocket bike in long island ny

    General Pocketbike Discussion
    hello i am located in deer park in long island i am looking for a pocket bike for 100$ or under close as that is all i have to spend im looking for something like a cag preferably:):D: PLEASE HELP
  5. can't find a part for clutch

    Minimotards, Mini Dirt bikes & Mini Quads
    I have have a 49cc mini quad, motor is what comes in a cag. I looked at the clutch(just in mind i just bought it) and the keyhole lock is missing, reason why it was not running. Now this clutch does come and crank does come with it but its missing. Where can i find a clutch keyhole lock? or do i...
  6. upgraded to 49cc, need bigger jet?

    HELP! Ask our shadetree mechanics
    i recently upgraded my cag to 49cc head kit, I got it to run but only at 1/2 -3/4 throttle with the choke on otherwise it dies. I let it warm up but still the same thing happens. if I turn off the choke it dies as well. im thinking off the top of my head get a bigger jet. thanks in advance...
  7. a/c on carb?

    General Pocketbike Discussion
    my carb doesn't have a shut off valve, but it does have a little lever and one side says a and the other says c. i ignored it but now im kind of curious
  8. Questions on a Racing Cag Build

    Air Cooled Pocketbikes
    Hi everyone, in the near future i plan on building track ready cag (MTA-2) to race against my mates on. I'm hoping on doing some frame modification or possibly designing and building my own. So my first question is on the geometry of the frame, what will give the bike better handling i suppose...
  9. Is there anyone in Western Colorado?

    Air Cooled Pocketbikes
    Hi my name is Cris and I live in Grand Junction, CO. I am trying to get some people together to race or at least get some tips with my Cag pocket bike.I am a NOOB at this mini bike world. I have lots of questions.
  10. Polini upgrades?

    Water Cooled Pocketbikes
    Hey looking for anyone who can help. I have a ten+ year old polini 910 carena s, and I'm pretty sure it's all stock still. I was wondering what the best fuel-oil ratio is? Also what are some of the best initial upgrades to make on the bike? It already out performs my friends cab by miles, what...
  11. can't maintain top speed

    Air Cooled Pocketbikes
    Hey guys. My problem is that when I get to top speed on my cag.. it will cut out and hiccup and cannot maintain top speed. On my stock cag I can drive around at top speed all day long without issue. I'm not sure if the carb can't keep up with filling the bowl or something else. If I am driving...
  12. Getting a mta3 in Better Condition

    Air Cooled Pocketbikes
    Just picked it up from a guy on craigslist and right off the bat I noticed a few things, the silencer on the end of the exhaust is gone, can't idle, and plastics are pretty ****ed up. I think I'll keep this thing for at least two weeks then sell it again. But any one know of a cheap exhaust that...
  13. Cagllari Owner - I'm Back!

    New to PocketBikePlanet? Star With an Introduction
    Sup, I havent been on this site in a while, like 2-3 years ago. Back then I was a noob when it came to how an engine worked and anything to-do with a pocket bike or any motorcycle. Now, at I've been through a couple years in my life, I've also taken auto in high school. I know the basics. I dont...
  14. Hey Guys, New here, Unknown Bike!!

    New to PocketBikePlanet? Star With an Introduction
    Hey Guys, Im new to this forum! So i've just bought from a car boot, a nice little Mini Moto, well I'm not quite sure what it is. I've got it home, and it runs a beauty, but I have no idea what make, model, number, nothing about it. Can anybody help me here, what is it?
  15. what do you need to run a 70cc scooter cylnder on a cag motor ?

    Air Cooled Pocketbikes
    im talking about what crank would you need and stuff and would it even fit on the cases i saw one of driver d,s threads and wanted a go my self
  16. Die at High RPM?

    New to PocketBikePlanet? Star With an Introduction
    Danish, Cag 49cc Pocketbike! Hello im 18 years old Man from Denmark, i have a Cag Daytona, Pocketbike 49cc, old ****, so i am to shine it up a bit and make some upgrades! Cag Daytona 49cc Stock carb, polished! Stock exhaust, with bigger pot! Color: White right now, will soon be blue! Running...
  17. Help Identify Bike?

    General Pocketbike Discussion
    Cool Picture forgot I posted here already... and dont know how to delete this thread. sorry
  18. I need help cleaning a cag performance carb, it leaks all the gas out right now

    Air Cooled Pocketbikes
    I bought a used cag and it has a performance carb on it and when I put gas in it it flows out really quickly. I read about the bowl or something but I am not sure what to do. Also I took out the throttle cable and a spring and metal thing came out and I dont know how to put it back together...
  19. lets see some custom bikes chopper cag or mid

    General Pocketbike Discussion
    this is my newest one i am going to try to mount my cag motor on it and see how it works till i get a 150cc to go into it built most of it myself only the seat and the dual exhuast are original
  20. Few Questions About A Cag

    HELP! Ask our shadetree mechanics
    How do I reassemble this? It's the end of the throttle cable that goes into the carb. Also I am not sure about this Jet Pro Pipe, I got it to fit but in the picture it show's two washers and two of those little metal circle but I only got one of those so do I need to go to a hardware store and...
Top