Search Results for ‘carb’

I have a predator 212 hemi and just got the mikuni GPS clone from go power sports with a 16 pilot jet and a 130 main I've swapped the 130 main to a 115 now when I start the bike it idles fine doesn't creep forward at all even when I'm not sitting on it but when I pick up the back tire off the...

my carb doesn't have a shut off valve, but it does have a little lever and one side says a and the other says c. i ignored it but now im kind of curious

I messaged people on eBay asking if they would sell me just these parts but doesn't seem like anyone is willing to do that. Any ideas?

buying a new carb and there are 2 of the exact same one that fits my bike but one is 15mm and one is 19mm, what do i measure to find out which one i need?

New here and not sure where to post question. I have a PZ19 carb on a 110cc engine. I keep having a problem with it overflowing gas. Carb got gummed up for sitting for a couple months so I took it apart and gave it a good cleaning. After I put it back together it started leaking fuel from the...

I just got a cateye from a good friend... he got the bike 8 years ago played with it a few times then it stopped working.... we got drunk that night and started fixing it....BAD MOVE.... sad to say we just went out the next day and got 4 strokes instead......On ta 2013 the bike sat in his shed...

Ok so I've bought a bike with a few upgrades mainly from funbikes.com I think but since getting the bike I've come to realise the lad I've bought it off hasn't had a clue about bikes ..... So it has the big top end with crank, 19mm del style carb and a race style exhaust. The carb is over...

my step dad gave me a high performance keihin carb the other day i spent 3 hours rebuilding it and cleaning everything. so now... will it work>? lol i attached some pics

So i bought a bike for $65, so far it's had many problems, they include: it leaks petrol out of the carb, for some reason black liquid gets into the clutch area, a lot of vibration, enough to unscrew the spark plug. Also when you go WOT the engine cuts and this is the same when you give it none...

Hi all, ive just recently aquired an X22 Super Pocket Bike that i know will run as soon as i can get a new carb for it. The one i have now leaks gas from the bowl in the carb where the float is and such because there isnt a proper gasket keeping it all in. I was wondering if you all had any...

OK I got a mini chopper fake v twin motor one... Im getting a jetpro tuned chopper pipe and porting and polishing it... What kind of carb to buy? mm? the HP walbro clone? And what kind of settings and jets should i have ? aLSO... Would it possible to dumb the primer bulb carb and use a...

I bought a new carb for my 49cc cateye, but all it does is idle then when I give it gas and sit on it, it is very weak and bearly drives me. If I pick it up it spins the wheel. I I tuned it 2.5 turns out. Any ideas? Is it a bad clutch?

I bought a used cag and it has a performance carb on it and when I put gas in it it flows out really quickly. I read about the bowl or something but I am not sure what to do. Also I took out the throttle cable and a spring and metal thing came out and I dont know how to put it back together...

Hi, I am new to pocket bike planet and I am having a lot of problems with my 49cc Suzuki pocket bike. When it actually runs it is really fast, but I always have had issues with starting it and keeping it running. I just bought a brand new carburetor for it yesterday thinking that it would...

Is this screw the A/F or idle? http://i1229.photobucket.com/albums/...b/DSCN1001.jpg Which ever that is wheres the other?? I can only find one screw on the whole carb.... http://i1229.photobucket.com/albums/...b/DSCN1000.jpg

How do I reassemble this? It's the end of the throttle cable that goes into the carb. Also I am not sure about this Jet Pro Pipe, I got it to fit but in the picture it show's two washers and two of those little metal circle but I only got one of those so do I need to go to a hardware store and...

I have an x18 with the stock carb. I need to adjust the idle and fuel/air mixture, problem is I can not figure out how. where are the adjustments? I posted a picture and you can clearly see there is only one screw on it to adjust things. please fill me in. are there any adjustment screws on the...

Im wanting to do a motor swap to a lifan 140cc on my x18. The kit i am buying comes with: Lifan 140cc motor 26mm Mikuni carb 40 mm air filter cnc oil cooler set with oil lines kick start shift lever clutch cable clutch lever perch engine cover engine wiring harness 24mm intake manifold seal...

When I pull on the pull start, it doesn't start. When I put carb cleaner on the carb, it starts but won't accelerate. I don't know if it could be the carb or the spark plug or anything else. I also cleaned the carb completely, so I don't know what to do next. Could it just need adjusting in the...