Pocketbike Forum banner

Carbon Reed issue need help

443 Views 2 Replies 3 Participants Last post by  EPR
i bought a carbon reed for my bike. the problem im having is when i mount it to the reed block it pulls the reed off the end of the block and its not seating flat on the block can i modify the block or the curved piece or some other remedy
1 - 3 of 3 Posts
Your overtightening the reeds...carbon fibre,,fiberglass and composite reeds need to be installed snug with loctite red on the screws.........
That's right I have had the same problem before, overtightening, blue loc tite works wonders.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top