Pocketbike Forum banner

1 - 20 of 135 Posts

·
Registered
Joined
·
192 Posts
Discussion Starter · #1 ·
I just grabbed a minipocketbike for $30. In hoping i didn't make a bad buy. The sprocket on the motor has broke off, is that able to be replaced???

The pic wouldn't upload I'll try to load it in a reply
 

·
Banned
Joined
·
24,145 Posts
Your photos need to be 512Kb or less and 90Kb or less for your avatar photo. The pinion gear can be replaced but its a pain, and hard to find one the will fit the stock bell housing. You can get a 3rd bearing housing for about $25 dollars online, if you do get a 7 tooth.
 

Attachments

·
Registered
Joined
·
192 Posts
Discussion Starter · #5 ·
It's something to do with my phone not opening the window, usually it works faster than my home pc. I'm charging it now and gonna try again shortly

Is there any way you can show me what the part your talking about looks like?

I'm gonna look at some pics on Google to try to figure out what it is, still can't get the window to let me browse files

It has the kind of motor that kinda looks like a mini tecumseh, LOL not sure if that tells anything but about the best i can describe it
 

·
Registered
Joined
·
192 Posts
Discussion Starter · #6 ·
By looking at pics, the blade looks like some of the parts are dead on matches., mainly the chain. Guard is identical.

Is the blade a mini pocketbike? Let me know if any other bikes use the same chain guard as the blade. Please and THANKYOU
 

·
Registered
Joined
·
192 Posts
Discussion Starter · #8 ·
Yes I'm pretty sure that's it, the can on the exhaust is the same and same color. Do they sell just the gear for those or do I need to buy the whole piece that bolts onto the motor with 4 screws?
 

·
Registered
Joined
·
192 Posts
Discussion Starter · #9 ·
Ok I think I found what I need, the clutch drum. Dang $35 i wonder if it can be Fount.d cheaper. So total it will cost about $70 with a new clutch drum. It ran so at least that's a plus
 

·
Banned
Joined
·
21,742 Posts
Yes I'm pretty sure that's it, the can on the exhaust is the same and same color. Do they sell just the gear for those or do I need to buy the whole piece that bolts onto the motor with 4 screws?
They sell just the pinion but it depends on how its busted off whether or not it can be replaced.............On ebay you can get the clutchbell housing with pinion for $20 bx shipped
 

·
Banned
Joined
·
24,145 Posts
For $20 more get the Raptor, it's really a Lucky 7, Cadillac of Pocket Bikes. My avatar bike is a L7 custom, I built w/ parts.
The other one is just an MTA2 full body Cag w/ alum starter housing.
 

·
Registered
Joined
·
192 Posts
Discussion Starter · #13 ·
The only way for us to know what you have for sure and what you need is to post pics...start a free photobucket account and load pics there and drop IMG links here...........Photobucket is mobile phone friendly too.........

http://www.minipocketrockets.com/blade-pocketbikes/

hey cam2, been looking at that site most of the night, and many others but by far that has the best price on a complete set of fairings, am i reading that right $12.95 plus shipping for a complete set that will fit the blade. it just seems too good to be true, have you ever bought from this company? just wondering if you knew if they were reputable. thanks for the link that site so far is great.
 

·
Registered
Joined
·
192 Posts
Discussion Starter · #14 · (Edited)
They sell just the pinion but it depends on how its busted off whether or not it can be replaced.............On ebay you can get the clutchbell housing with pinion for $20 bx shipped
yay finally the pic shows up in my email. i took this one last night, im pretty sure its a blade but i have been wrong several times in life.
 

Attachments

·
Registered
Joined
·
192 Posts
Discussion Starter · #15 ·
dang, i took the motor off and started to take it apart to clean it up real well, and i realized someone crushed the intake manifold, so i need to add that to the ever growing parts list. but if that fairing set is actually only 12.95 plus shipping ill be a happy man and will have this bike looking new soon. at least i hope
 

·
Banned
Joined
·
21,742 Posts
cam2, would you happen to know who makes the Blade?
Thats not a Blade..Thats a regular MT-A1 half fairing cag.......




I call that frame design the neckbreaker because it looks like a copy of the Blata 2.5 frame that snapped on me.....If I had that bike I would add extra support tubes for the neck and get rid of that thin metal plate

As far as a manufacturer....Its hard to say exactly...theres about 4-6 different manufacturers for almost each model made
 

·
Registered
Joined
·
192 Posts
Discussion Starter · #18 ·
ahh hah, awesome, well not really awesome, but will a blade body fairing kit fit on it do you think? the neck breaker part sounds nice too!
 

·
Registered
Joined
·
192 Posts
Discussion Starter · #19 ·
yup that pic you posted looks like it. maybe i should have passed on this one, its missing the rear brake, both brake handles. the pinion gear, one foot peg is broke and the other is not there, not sure if tires hold air. needs new shaft and pinion gear and body and an intake manifold. but the motor started right up once i put some fuel in it, so i figure 30 for a motor is ok as long as i can get the gear on there pretty cheap and a chain. maybe ill get rid of the rolling frame and use the motor and a few pieces for another project, especially if its a neck breaker
 

·
Registered
Joined
·
192 Posts
Discussion Starter · #20 ·
found this clutch housing, looks like it will fit, its only 14.99 and i can pick it up. let me know if it iwll work. and if im able to post a link
\
Two Stroke Clutch Parts - Pocket Bikes 7T Clutch Assembly #07 for 47cc 2-stroke $14.99
 
1 - 20 of 135 Posts
Top