Pocketbike Forum banner
1 - 12 of 12 Posts

·
Registered
Joined
·
85 Posts
Discussion Starter · #1 ·
foot a x1 pocket bike and it doesn’t have a pull starter heres some pics, sorry if they are bad quality.. i don’t have a pull starter, back turn signal, a fuel line(unless theres only 1) and theres some scratches and cracks on the frame



OH!! and when i bought the pocket bike the guy said there is no electric start…. how do i check if there is?? heres a video of my pocket bike on youtube

http://www.youtube.com/watch?v=Z4KNF6y7B4Q
 

Attachments

·
Banned
Joined
·
24,145 Posts
You need the Moon MS starter housing, It's black inside with 2 pins the hook the knotches on the round starter paw. Both styles look the same on the outside of the cover, the inside and starter cover, is what you want to look at. The white inside cover is for an alum retangle paw with paddle. I have both.
 

·
Banned
Joined
·
21,742 Posts
foot a x1 pocket bike and it doesn’t have a pull starter heres some pics, sorry if they are bad quality.. i don’t have a pull starter, back turn signal, a fuel line(unless theres only 1) and theres some scratches and cracks on the frame



OH!! and when i bought the pocket bike the guy said there is no electric start…. how do i check if there is?? heres a video of my pocket bike on youtube

http://www.youtube.com/watch?v=Z4KNF6y7B4Q
Its got electric start...I can see an armature behind the starter pawl......This is how you start an X1........you set the choke,,pump the primerbulb 10x,, turn on the key,,squeeze the rear brake lever and push the start button...If the battery and wiring is good it will crank over.........
 

·
Banned
Joined
·
24,145 Posts
Some of the bikes have a switch that cuts off the starter motor till you pull in the rear brake and or clutch lever or front brake on my X18.
Look at where your brake grips are, are there any wires coming out of the housing??
 

·
Registered
Joined
·
85 Posts
Discussion Starter · #8 ·
Some of the bikes have a switch that cuts off the starter motor till you pull in the rear brake and or clutch lever or front brake on my X18.
Look at where your brake grips are, are there any wires coming out of the housing??
i THINK its my charger,its dead maybe! i have a kill switch, i pressed the rear brake and then the yellow button and it didn’t work, or????
 

·
Banned
Joined
·
24,145 Posts
If it turns over first pull the spark plug and look for a spark then put alittle gas down the carb and try again.
 

·
Registered
Joined
·
85 Posts
Discussion Starter · #11 ·
If it turns over first pull the spark plug and look for a spark then put alittle gas down the carb and try again.
i have no idea, so i put the carb button thing down. then i pumped the one thing on the carb, turned the key, pressed the rear brake and the yellow button. nothing is happening……………….. I’m gonna send you a video right now of it with out the body and stuff, and if it needs anything…. thanks!!
 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top