[Enemigo]

I got a normal china pocket bike that i haven't turned on for almost a year. Yesterday i took apart the carb and cleaned it all out, cleared out the fuel lines and added fresh fuel/oil mix. I couldn't get the bike to start. I checked for spark, there is some, poured a bit of gas down the spark hole and it started, but just until that fuel burned out. So i'm completely stummped. I'm assuming the engine is not getting fuel. So if there is anyone who has a clue on how to help me, let me know. I live in Ewa. thanks. P.S. please email me for faster response.

 

[CAM2]

Welcome to the forum.....Look up petcock mod and do it...Your petcock most likely is the culprit to your problems..Good Luck

 

[EPR]

Did you clean the main jet in your carb, and are your reeds sealing on the pads, there behind the intake manifold.

 

[Enemigo]

Did you clean the main jet in your carb, and are your reeds sealing on the pads, there behind the intake manifold.

I did clean the main jet, don't know much about the reeds though. I have the same exact bike you have in your sig pic.

 

[EPR]

That bike is a C1, 50cc Blata Orgami water cooled copy bike. Not like the air cooled Cag engine. Does you bike a have a radiator??