Pocketbike Forum banner

Need help!!!

912 Views 4 Replies 4 Participants Last post by  CAGowner
So I decided to rebuilt my x2 pocket bike after my friend crashed it and destroyed the right side body ... He said he would fix it but instead of fixin it he made it worse .... Does any one have a wirering schematic diagram of the motor to starter and key function i dont care about the light or horn ... I decided to make it a track pocket bike
1 - 5 of 5 Posts
So u dont want a key ignition right? .....Disconnect the wires coming from the starter... Connect your throttle to the Magnito and that will bypass the electric start ....your electric start switch on your throttle will now be your engine kill switch ...
I want to use the key and the push start ignition I just don't care about lights or horns
I removed all wiring on my bike. I made my starter button into a kill switch. EPR posted a wire diagram in a few threads. This one that ERP posted.

http://www.pocketbikeplanet.com/attachment.php?attachmentid=52061&d=1351707139
I removed all wiring on my bike. I made my starter button into a kill switch. EPR posted a wire diagram in a few threads. This one that ERP posted.

http://www.pocketbikeplanet.com/attachment.php?attachmentid=52061&d=1351707139
That is for the x1 I remember someone telling me on the x2 the wire colors are different
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top