New pocket bike available

3208 Views 14 Replies 7 Participants Last post by EPR, Aug 21, 2012

SDscooters

Discussion Starter · Aug 19, 2012

There is a new pocket bike available, YAY! Yes one actually made it by the EPA. Its a 33cc air cooled piston port engine. Bike looks like an MTA2 with the 3 piece style nose.

Specifications:
gp33 pocket bike
Motor: 33cc 2-Stroke, Air Cooled, EPA Approved
Engine Start: Pull Start
Gas Tank: 1.25 liters
Cruising Range: 20 miles per tank
Fuel/Oil: Unleaded / 2-stroke Oil 32:1
Transmission: Centrifugal (chain drive)
Pocket Bike Size: L=43in, W=15in, H=24in
Recommended Age: 13+
Max Rider Weight: 170 lbs
Frame: Steel
Tires: 90/65-6.5 Pneumatic (11 inch)
Brakes: 1 disc front, 1 disc rear
Frame: Ridged
Throttle: Variable twist-grip
Seat: Padded (single rider)
Handlebars: Angle Adjustable, Not Height
Assembly Required: Yes
Box Size: 43x15x24 inches
Box Weight: 50 lbs
Product decoration and specifications subject to change without notice.
Warranty: 30 days parts replacement

more at:
/pocket-bikes/gp33-pocket-bike.html

We will be pulling one into the office for additional photos and information. Its sunday i'm off to have some fun

Hugh
SDscooters

See less See more

1 - 15 of 15 Posts

sky21

· #2 · Aug 19, 2012

That's awesome!!!!

CAGowner

· #3 · Aug 19, 2012

Yay!! Now they need to make some midbikes!

CAM2

· #4 · Aug 20, 2012 (Edited)

Thats some sweet news to all who have been looking...seems it could have either a mitsubishi or zenoah 33cc.....I see they make the engine harder to upgrade as far as heads.......Very easy to get by by buying a 49cc engine thats either reeded or piston ported

Are these legal to sell to residents of the state of california seeings its still a 2 smoker?

Whats gonna be the bottom line price...........?

how many will you be getting for sale...?

I think the chinese should rip off the robins 4 styroker engine design and put those on pocketbikes......

MathieuOuellette

· #5 · Aug 20, 2012

This is great news... and yeah a 49cc swap should not be too much trouble here... Nice going hugh!

IntegraGSR5

· #6 · Aug 20, 2012 (Edited)

i saw your post on ebay earlier. it looks nice. the only thing is the engine is kindda small. wonder what kind of engine they have in there ? and have you ever tested any1 of these too see how well it ran

EPR

· #7 · Aug 20, 2012 (Edited)

Them tires Suck Big Time, there too hard, too skinny and too ugly. My A2 from Canada came w/ them Quote Rain Tires. I went to SP4L and got a set of Guetto slick tires & wheels,for $55.
Does the 33cc have the same cases as the 49cc?

CAM2

· #8 · Aug 20, 2012

IntegraGSR5 said:
i saw your post on ebay earlier. it looks nice. the only thing is the engine is kindda small. wonder what kind of engine they have in there ? and have you ever tested any1 of these too see how well it ran

I have that same 33cc engine on my Zooma stand up scooter........The engine is a screamer but is definately underpowered.......Mods and powerporting only do so much...........Top speed i got outta my zooma was 26-27...stock it barely hit 18.

See less See more

EPR

· #9 · Aug 20, 2012 (Edited)

That would be the perfect bike to put my 49cc Red Head Zen/Mitsu engine.
I got a Flash when I looked at it again 2 minutes ago.
One question, What transmission does it have.

IntegraGSR5

· #10 · Aug 20, 2012

CAM2 said:
I have that same 33cc engine on my Zooma stand up scooter........The engine is a screamer but is definately underpowered.......Mods and powerporting only do so much...........Top speed i got outta my zooma was 26-27...stock it barely hit 18.

**** thats slow. i probably save my money for a used euro bike or a banshee.

SDscooters

Discussion Starter · #11 · Aug 20, 2012

Answers:

-Are these legal to sell to residents of the state of california seeings its still a 2 smoker? no smokers for cali

Only aware of one CN engine mfg with epa cert, these should be from the same mfg

-Whats gonna be the bottom line price...........?
319 delivered

-Does the 33cc have the same cases as the 49cc?
smaller / expecting the mount to be bolted in so they might be interchangeable

-i saw your post on ebay earlier?
thanks but we are not on ebay

-how many will you be getting for sale...?
100pc were imported

-What transmission does it have?
assuming a pb transmission (due to price and left hand chain) not sure it will accept a pb engine (see vertical support in image behind wheel - larger image on website)

Hugh
SDscooters

See less See more

EPR

· #12 · Aug 21, 2012

4

Sounds like a decent deal to me. MPR wants $299 for an A1 plus shipping plus CA.Tax,lol, was afraid to ask. The red head piston port of mine would probably bolt right up, thats the one w/ the HDA 223 purge carb I got from you. It has a Cag bell that I modded already, might have to drill new holes to mount it, but I have alot of drills like Cam2,lol.

See less See more

EPR

· #13 · Aug 21, 2012

How are they going to know if you ship it from Texas to California, I don't think UPS gives a rats azz whats in the box,lol,lol.

CAM2

· #14 · Aug 21, 2012

2

EPR said:
That would be the perfect bike to put my 49cc Red Head Zen/Mitsu engine.
I got a Flash when I looked at it again 2 minutes ago.
One question, What transmission does it have.

It says it has centrifugal chaindrive which has the same setup as my old piston ported engine cag except its not 49cc.................

See less See more

EPR

· #15 · Aug 21, 2012

I can see the flywheel housing and I can't see whats over the clutch, but my guess is the Cag bell.

1 - 15 of 15 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.