Pocketbike Forum banner

New rider in pgh

844 views 10 replies 4 participants last post by  swheels 
#1 ·
Hi, just got an 09 manual x18 for dirt cheap, mint condition...where do i start for mods ? id like to go the blouch turbo route...
 
#2 ·
If your asking what mods to do I don't think your ready for a turbo kids wishfull thinking lot of work and lot of fab work but it can be done
If you know how to set up a turbo motor
Mods reg mod list is
22mm carb
Bigger fuel lines
Upgraded cdi
Super coil
Ngk plug
Drill out motor and mounts to 3/8 and use grd8 bolts nuts lockwasher and loctite
Then
Gusset frame in its weak points
28t rear sprocket
Better tires
Real working Speedo
Real rear shock
Mod front forks
ECT ECT
If you do the turbo setup we would all like to see that done and a vid as well
And there are a couple fuel Injected setups out there too as well you could try
 
#5 ·
definitly not new to turbo setups, im running 26psi in my STI with a roated 35r setup ... this mini bike is just something to **** around with while im waiting between heats at the track :) if it breaks it breaks... i got it for $400 and it was pretty much never ridden before.... had like 5miles on it if even that much.
 
#11 ·
Uh no......I was just showing that even a 50cc can be affective if turboed or supercharged and setup properly.

I'm willing to bet it would slaughter a 110cc though.lol
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top