[ihelpfull]

I uploaded two pictures! One is with an engine that has "normal" colors and the other picture shows a 125cc engine from a gio 125cc and the colors coming from the stator dont match the other engiine.......

I just want to wiire this and get it started.

 

[CAM2]

The two yellows go together,,,,the two sets of greens connect together,,the grey and the white go together,,the black w/red stripe and the brown go together...im pretty sure theres a black round plug attached to the blue wire....if so its a neutral or reverse sensor light........

 

[ihelpfull]

Ok, its easy to wire in the "normal" colors, but i was just wondering how to wire this. I only want to be able to kick start it and ride... here is how my cdi is wired with normal colors

 

[ihelpfull]

The colors are;

Black/Red, Yellow, green/white, green, and white in the unsuall colored wiring

 

[CAM2]

The colors are;

Black/Red, Yellow, green/white, green, and white in the unsuall colored wiring

You only need two wires to get the spark plus the ground..the green can be grounded to the frame or tied into the green coming from the CDI

 

[CAM2]

Ok, its easy to wire in the "normal" colors, but i was just wondering how to wire this. I only want to be able to kick start it and ride... here is how my cdi is wired with normal colors

the wire that looks pink in the lower right part of the connector is where the black wire with red stripe ties into and in the wires coming from the stator youre missing a blue with white stripe,,,............

 

[ihelpfull]

Okay il just replace the stator then. I got this as a project bike. thnx for evrything, it doesnt have a wire harness so i have to make one or order from ebay

 

[EPR]

Here is an X18 full wiring 110cc, it might help you trace the CDI wires and other stuff.