Pocketbike Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter #1
I have a 43cc X1. I put a HP carb on it and a fatty pipe. For some reason it wont start. I grounded the plug to the block and got spark And when i try to start it i just end up pumping fuel out the exhaust. So ive got air, fuel, and spark but it wont start. I got a walbro adapter plate with the carb and it came with three gaskets. I dont know were the third one goes and im thinking that could be part of my problem. Any help is appreciated. Thanks.
 

·
Banned
Joined
·
21,744 Posts
Three gaskets.............One goes between the manifold and the engine............One goes between the manifold and carb adapter,,one goes between carb adapter and the carb and one goes between the carb and v-stack..........

Did you try a new sparkplug?............NGK BPM6A gapped to .030"

Sounds like your coil needs to be cleraned up and regapped to .020"...................
 
1 - 3 of 3 Posts
Top