Pocketbike Forum banner

1 - 15 of 15 Posts

·
Git R Dun PBracer
Joined
·
766 Posts
Discussion Starter · #1 ·
On my x5 the coil has 2 wires from it. Green and black one. It may be brown. The green wire shorted out. I'm wanting to know which wire can be used to be a kill switch. I'm also wanting to use the stock kill switch on the bike. I don't plan on using the electrics on the bike.
 

·
Banned
Joined
·
24,145 Posts
I think on the 2 wires, one to goes the key and one to the kill button, both ground the coil. Look at both wire and onr might be the return from the kill switch and is grounded at the coil.
 

·
Banned
Joined
·
21,742 Posts
Theres a starter button on your throttle and if youre not using the e-starter can use the two wires coming from the push button and hook them into the two wires coming from the coil to make a killswitch...

if you are using the e-starter the two wires go to the black and green coming from the keyswitch................
 

·
Git R Dun PBracer
Joined
·
766 Posts
Discussion Starter · #4 ·
Cool. Ty for the help. My wife and I just finished sanding and painting yesterday. I started putting it back together today. I hope to have it done my Monday.
 

·
Git R Dun PBracer
Joined
·
766 Posts
Discussion Starter · #5 ·
Almost finished with my x5. Using the started button as a kill switch worked out great. TY.
 

·
Banned
Joined
·
21,742 Posts
Almost finished with my x5. Using the started button as a kill switch worked out great. TY.

No problem .....Is that frame in your avatar the frame to your X5?...If so you dont have an x5 you most likely have an x3......

This is what an X5 looks like along with the bare frame next to it..........

 

·
Git R Dun PBracer
Joined
·
766 Posts
Discussion Starter · #7 ·
Yeah that's my x5 as my avatar. Right side chain drive with the Cctv trans. That x3 in your picture doesn't look like my bike. Different body,exhaust, trans and chain drive. I have mine almost all together with most of the body parts on it. I'm missing the side plastics. I gotta work in my carb . It only runs when the choke is on and the throttle all the way open. Even then it wont stay running. I don't know what's up with it. It was running great yesterday.
 

·
Banned
Joined
·
21,742 Posts
Yeah that's my x5 as my avatar. Right side chain drive with the Cctv trans. That x3 in your picture doesn't look like my bike. Different body,exhaust, trans and chain drive. I have mine almost all together with most of the body parts on it. I'm missing the side plastics. I gotta work in my carb . It only runs when the choke is on and the throttle all the way open. Even then it wont stay running. I don't know what's up with it. It was running great yesterday.
Its not an X3,,My picture is a real X5.......

This is an X3

http://www.youtube.com/watch?v=n3ri3jNvOOs&feature=relmfu
 

·
Git R Dun PBracer
Joined
·
766 Posts
Discussion Starter · #9 · (Edited)

·
Git R Dun PBracer
Joined
·
766 Posts
Discussion Starter · #10 ·
My bad it was on the side panel.
 

Attachments

·
Banned
Joined
·
21,742 Posts
Yeah you got a mis identified pocketbike...theres Boreem X5 Cateyes aswell so theres a likely chance that x5 got slapped on by a newbie 10-13 year old chinese kid....

That X3 is exactly the same as the X2 just with different plastics...The X1 shares the same frame but comes with 43cc engine,,poop pipe with no expansion chamber and chaindriven non-cvt transmission

X-5's come left hand chain drive ..............

http://www.youtube.com/watch?v=ZUrxmgjxmXQ
 

·
Registered
Joined
·
1 Posts
Hey guys i was reading your posts and have a couple questions my coil has 2 wires coming from it there is a black one and a black/white one my ignition has 4 wires black, black/white, red, green what wires from ignition do ihook up to coil. This electrical is gonna make me gray and im too young for that can someone help i have a rx7 superbooster boreem thanks
 

·
Git R Dun PBracer
Joined
·
766 Posts
Discussion Starter · #13 ·
Are you trying to make the starter button into a kill switch?
 
1 - 15 of 15 Posts
Top