Pocketbike Forum banner
1 - 14 of 14 Posts

· Registered
What's your poison? Mine is 40:1
Joined
·
1,728 Posts
Unfortunately wiring needs to be redone by hand. That's only for the electric start, lights, speedo, and stuff. It needs bo electronics to run a 49cc engine.
Unless you have the 4 stroke, pit bike wiring off ebay or Amazon.
 

· Registered
What's your poison? Mine is 40:1
Joined
·
1,728 Posts
You don't even need a kill switch on a 2 stroke. Choke on and full throttle will act as a kill switch.
So if it is the 49cc 2 stroke. You need no wiring to the engine. Just the coil to spark plug.
 

· Registered
What's your poison? Mine is 40:1
Joined
·
1,728 Posts
Yep.
Only one I could have used one on was a dirtbike someone had the clutch adjustment wrong the front brake failed and the bike walked out from under me. Somehow I choked it with my hand over the carb.
 

· Registered
What's your poison? Mine is 40:1
Joined
·
1,728 Posts
You will have to wire everything yourself. They don't make wiring for the two stroke bikes. But it's not difficult if you have some sort of wiring there. Just retrace and redo.I know there are wiring diagrams online as well.
 

· Registered
What's your poison? Mine is 40:1
Joined
·
1,728 Posts

Here is the info on mods for your piston port engine. The link will take you to it.
 
1 - 14 of 14 Posts
Top